What are the key points for laying hydraulic bricks in construction

In recent years, hydraulic bricks have been used in the design and planning of small and medium-sized rivers. Based on the different geographical locations of the river sections and the surrounding urban construction environment, in addition to conventional standards such as flood control and flood season, requirements for beautifying the environment have also been added. Now let's introduce the key points of laying hydraulic bricks.
Hydraulic tiles, with the improvement of people's aesthetic awareness, ordinary floor tiles can no longer meet the requirements of urban greening. In the process of urban ground greening, different colors will bring different feelings to the entire city. In urban construction, colored bricks play an important role in ground hardening. In order to help customers better understand colored bricks, more elements that people want are integrated into ordinary bricks. The raw materials for general colored bricks mainly include river sand, cement, and various pigments. Moreover, colored bricks can be pressed into different shapes according to different mold equipment, making it more convenient and simple for us to lay on urban streets and pedestrian streets. In terms of the quality of colored bricks, colored bricks have significant advantages over commonly used marble because they are relatively inexpensive, have bright colors, high load-bearing capacity, and are easy to construct.
Before laying, check the reserved size between the concrete strip around the working face and the surface filter material.
When transporting hydraulic bricks, one or two wooden slides with a width of not less than 1.0m should be laid on the top surface of the embankment slope, and then the hydraulic bricks should be transported along the wooden slides to the paving surface in sequence.
When laying the flatness control, the lines should be hung on the horizontal and vertical planes. That is, when laying hydraulic bricks, not only should the longitudinal lines be hung, but also two horizontal lines should be hung from the top of the slope first to ensure that each row is on the same plane and avoid arching.
4. Side seam treatment: After each working surface is laid, it is inevitable that there will be varying degrees of gaps with the strip. If the size of the side seam is greater than or equal to 1/2 brick, it should be repaired with bricks first, and then filled with 1:1 cement mortar.
The above are the key points for laying hydraulic bricks, so everyone can have a general understanding. If you would like to inquire about more relevant information, please contact us.