What is river slope protection brick

River slope protection brick is a composite board made of concrete and coal ash. In addition, its exterior design is larger than bricks and the construction speed is faster. Slope protection bricks are also divided into three types: small, medium, and large, among which small and medium-sized bricks are generally used. Let's take a look at the introduction of river slope protection bricks.
The appearance of slope protection bricks can be divided into porous grass bricks, single row and double row square channels, and three rows of flat hole lights. For green plants, porous structures are preferred, followed by the main bricks and auxiliary tool bricks. In addition, slope protection bricks with high moisture content should not be frequently soaked in tap water, as it will shorten their service life.
1、 Advantages of slope protection brick products
1. River slope protection bricks have good permeability and air permeability, which can quickly allow rainwater to seep into the ground, supplement soil moisture and groundwater, maintain soil moisture, and improve the living conditions of urban ground plants and soil microorganisms.
2. It can absorb water and heat, regulate the temperature and humidity of local surface spaces, and have a significant impact on regulating the urban microclimate and mitigating the urban heat island effect.
3. It can alleviate the pressure of urban drainage and flood control, and has a good effect on preventing public water pollution and sewage treatment. The river slope protection bricks prevent water from flowing on the roads.
4. No water accumulation after rain, no slipping after snow, convenient for citizens to travel.
5. The surface is very small.
What is river slope protection brick? It prevents road reflection and absorbs noise generated by vehicle movement. Rich colors, natural simplicity, affordable, and diverse specifications.
2、 Slope protection brick construction technology
To ensure smooth and sufficient compaction, the base material should be sieved, and the feces in the sewage treatment tank should be cleaned regularly. The harmful gases such as methane, carbon dioxide, and hydrogen sulfide produced by the digestion and degradation of settled sludge should be accumulated in the sewage treatment tank for a long time, and should not be cleaned or depressurized during normal times. If the gas reaches a certain concentration, it can cause serious accidents such as spontaneous combustion or explosion. At present, many restaurants and canteens in sewage treatment tanks use steam curing, which has low production efficiency, requires a large number of molds, and has high production costs. Fixed.
2. Lay permeable non-woven fabric.
3. Lay buffer sand on non-woven fabric.
4. Lay permeable bricks and adjust the inspected brick joints.
5. Add seams.
The above is an introduction to the river slope protection bricks that the editor has compiled for you. Friends in need can contact our company, hoping to be helpful to you.